当前位置:早雪网网络学院编程文档其他语言 → 配制路由器让我来教你(经典)

配制路由器让我来教你(经典)

减小字体 增大字体 作者:未知  来源:supcode.com收集整理  发布时间:2005-7-1 14:59:06
interface ethernet 0 ip address 192.168.1.1 255.255.255.0 ! interface serial 0 ip address 192.200.10.5 255.255.255.252 ! router ospf 100 redistribute rip metric 10 network 192.200.10.4 0.0.0.3 area 0 ! router rip version 2 redistribute ospf 100 metric 1 network 192.168.1.0 ! Router2: interface loopback 1 ip address 192.168.3.2 255.255.255.0 ! interface ethernet 0 ip address 192.168.0.2 255.255.255.0 ! interface serial 0 ip address 192.200.10.6 255.255.255.252 ! router ospf 200 redistribute connected subnet redistribute static subnet network 192.200.10.4 0.0.0.3 area 0 ! ip route 192.168.2.0 255.255.255.0 192.168.0.1 ! Router3: interface ethernet 0 ip address 192.168.1.2 255.255.255.0 ! router rip version 2 network 192.168.1.0 ! Router4: interface ethernet 0 ip address 192.168.0.1 255.255.255.0 ! interface ethernet 1 ip address 192.168.2.1 255.255.255.0 ! ip route 0.0.0.0 0.0.0.0 192.168.0.2 ! 五、IPX协议设置 IPX协议与IP协议是两种不同的网络层协议,它们的路由协议也不一样,IPX的路由协议不象IP的路由协议那样丰富,所以设置起来比较简单。但IPX协议在以太网上运行时必须指定封装形式。 1. 有关命令 启动IPX路由 ipx routing 设置IPX网络及以太网封装形式 ipx network network [encapsulation encapsulation-type]1 指定路由协议,默认为RIP ipx router {eigrp autonomous-system-number | nlsp [tag] | rip} 注:1.network 范围是1 到FFFFFFFD. IPX封装类型列表 接口类型 封装类型 IPX帧类型 Ethernet novell-ether (默认) arpa sap snap Ethernet_802.3 Ethernet_II Ethernet_802.2 Ethernet_Snap Token Ring sap (默认) snap Token-Ring Token-Ring_Snap FDDI snap (默认) sap novell-fddi Fddi_Snap Fddi_802.2 Fddi_Raw 在此例中,WAN的IPX网络为3a00,Router1所连接的局域网IPX网络号为2a00,在此局域网有一台Novell服务器,IPX网络号也是2a00, 路由器接口的IPX网络号必须与在同一网络的Novell服务器上设置的IPX网络号相同。路由器通过监听SAP来建立已知的服务及自己的网络地址表,并每60秒发送一次自己的SAP表。 Router1: ipx routing interface ethernet 0 ipx network 2a00 encapsulation sap ! interface serial 0 ipx network 3a00 ! ipx router eigrp 10 network 3a00 network 2a00 ! Router2: ipx routing interface ethernet 0 ipx network 2b00 encapsulation sap ! interface serial 0 ipx network 3a00 ! ipx router eigrp 10 network 2b00 network 3a00 ! 相关调试命令: debug ipx packet debug ipx routing debug ipx sap debug ipx spoof debug ipx spx show ipx eigrp interfaces show ipx eigrp neighbors show ipx eigrp topology show ipx interface show ipx route show ipx servers show ipx spx-spoof

上一页  [1] [2] [3] [4] [5] [6] [7] 


Tags:配制,路由器,经典
[数据载入中...] [返回上一页] [打 印]